ASSEMBLY INSTRUCTIONS
PRE-ASSEMBLY
You will need a slot screwdriver, hex screwdriver long nose pliers and an adjustable wrench
for assembly. Make sure to assemble the product by following this instruction completely
and properly.
MAINTENANCE
For the sake of safety, periodically inspect all moveable parts of the unit, and perform
proper maintenance if necessary.
TRICYCLE HARDWARE LIST
TRICYCLE ASSEMBLY INSTRUCTIONS
SETUP 1.
Place the back wheel (E) onto the back axle (A), put a flat
washer (4) on the axle, use pin (5) and wheel cover (7)
to lock the back wheel in place. Repeat stet 1 to assembly
other back wheel.
SETUP 2.
Attach the back axle (A) to the fork and frame
(H). Secure the back axle (A) with bolts (E),
washers (2) and nuts (3) by a phillips screwdriver
and wrench.
SETUP 3.
Use wrench to secure the pedal (D) onto the threaded crank
adjacent to the front wheel (G). Repeat step 3 to install the
second pedal. Fasten the short bolt (8) at the right side of
front wheel axle.
SETUP 4.
Follow diagram 4 to put nuts, washer, rings, fork and frame
together.
SETUP 5.
To assemble the handlebars (F). align the “nut boss” with
the slot into the tube, tighten the top screw by hand, Insert
the handlebars (F) into the hole of the front axle, use hex
screwdriver to tighten top screw. Please ensure over minimum
insertion marking position when tighten the top screw.
1-800-348-5004
3
1-800-348-5004
4
No.:
1
2
3
4
5
6
4
4
6
2
2
1
Bolt Ø8mm
Washer Ø8mm
Nut Ø8mm
Washer
Wheel Cover
Socket Head Cap Screw & Nut
Description
Qty’s
5
6
See step 4 for assembly
Place seat on the seat
connector, tighten screw
on the seat support at
the bottom of the seat
