8
night illuMination
night illumination is switched off by
default when the webcam is connected.
Press the illumination button to activate
night illumination.
Press the illumination button again to
deactivate night illumination.
Please note that night illumination only
works if the webcam is transmitting data
(see also the section status leD).
status leD
When the camera is transmitting data to a
messaging program the status leD will remain
constantly lit. as soon as you deactivate the
camera and/or the microphone using the Mute
button the status leD will flash. Pressing the
Mute button again activates the transmission.
consequently, the leD will remain constantly
lit again.
select snaPshot saVe Directory
here you can select the directory your photos
are to be stored in. select the directory by
clicking on the button. in the window that opens,
navigate to the desired directory or create a new
directory and click on ok.
Moisture
only use the unit in dry, interior rooms. Do not
operate the device near water and keep it away
from damp areas and areas where liquids are
likely to drip or be sprayed in order to prevent
damage occurring.
heat sources
Do not operate this device in the direct vicinity
of sources of heat such as heaters, amplifiers or
other devices which radiate heat. the device may
overheat and suffer considerable damage.
trouBleshooting/rePairs
Do not attempt to service or repair the product
yourself; leave any maintenance to qualified
experts. Do not attempt to modify the product in
any way as doing so will invalidate the warranty.
SAFETy
gB
03
