6
8 Importance & Attention
Ensure the Joystick ID of SL-6508 Intruder is “Joystick 1”, if it is prop-
erly plugged but does not work.
Once the gamepad has been properly plugged to your PC but does not
to work, please enter the Game Controllers page and select “Advanced “
page to check whether this SL-6508 Intruder is the “Joystick 1” or not.
If there is only one game controller connected to your PC, this
Gamepad must be absolutely the “Joystick 1” to work properly. If this
SL-6508 Intruder is not the “Joystick 1”, please remove it from the
“Game Controllers” menu, as well as other installed joysticks.
Subsequently re-install the SL-6508 Intruder and complete the calibra-
tion procedure, then it will work as usual.
Make sure your software supports the Game Controller/ Joystick.
Not every game requires all functioning buttons (8 buttons in total) on
your SL-6508 Intruder. If you find that some buttons do not work in the
game, please check your game settings again.
The function of the gamepad buttons may vary in different games.
Before proceeding the game setting in the options menu of the game,
always read your game’s manual carefully for the best game settings.
Your SL-6508 Intruder needs little care and services. You may clean it
with a damp cloth periodically. Do not use abrasive cleaners of
any type and do not spray liquid cleaners directly on your SL-
6508 Intruder. Any fluid leaks inside the joystick may cause
unexpected damages.
Never connect or disconnect your SL-6508 Intruder while your comput-
er is turned on. This might seriously damage both your SL-6508
Intruder and your PC.
INTRUDER Manual.qx 07.11.2001 9:43 Uhr Seite 6
