SpeedEPart AgrioFab 45-04071 Скачать руководство пользователя страница 13

Страница: 13 / 28

1/4" x 3/4"
HEX BOLT

1/4"
NYLOCK
NUT

1/4"
WASHER

1/4" x 1"
HEX BOLT

#10-32 x 5/8"
TRUSS BOLT

ROPE

SECURE

ROPE

KNOT

#10-32
NYLOCK
NUT

CLIP

11. Place the top angle support and cart bag ontop of the

cart as shown in figure 27. Then, using a screwdriver

or other sharp object, poke holes through the cart bag
for the bolts that will be assembled in step 12.

12. Attach the top angle support and braces to the cart using

seven 1/4" x /4" hex bolts, fourteen 5/16" washers (one
placed on each side) and seven 1/4" nylock nuts.

NOT TIGHTeN YeT. See figure 27.

NOTe:

Cart bag not shown for clarity.

FIGure 27

1. Slide each end of the rope through the holes in the

tailgate shown in figure 28.

14. Tie a knot in the end of each side of the rope to secure

the rope in place. Keep knot loose. See figure 28.

HINT:

Knot may need to be moved up or down in rope to

secure tailgate. See step 18 for more information.
15. Slide tailgate into tailgate guides.
16. Attach clips to rd lower support rod and fasten them

to the tailgate using two #10 x 5/8" slotted head bolts

and #10 nuts. See figure 28.

17.

TIGHTeN

all bolts assembled in steps 7 through 12.

18. Secure tailgate rope around the bolts shown in figure

28. If rope does not keep tailgate held down or rope
is too short to secure around bolts, move the knot up
the end of the rope to loosen or down to tighten. Once
knot is in desired location, tighten the knot to secure it
in place.

NOTe:

Cart bag not shown for clarity.

FIGure 28

While performing the assembly operations
in step 11, make sure the cart bag is between
the top angle support and the cart.

Содержание AgrioFab 45-04071





























Результаты поиска

Содержание AgrioFab 45-04071

Отзывы:

Похожие инструкции для AgrioFab 45-04071

Бренды по названию

Популярные бренды

SpeedEPart AgrioFab 45-04071, Руководство пользователя

Результаты поиска

Содержание AgrioFab 45-04071

Отзывы:

Похожие инструкции для AgrioFab 45-04071

Бренды по названию

Популярные бренды