SpeedEPart Agri-Fab 45-0578, Руководство пользователя

Страница: 8 / 24

8
9. Secure the hitch pin to the hitch bracket and tongue
with the hair cotter pin. See figure 6.
FIGURE 6
HITCH
PIN
HAIR
COTTER
PIN
10. Attach the engine base assembly to the tongue using
four 3/8" x 3-1/4" hex bolts, two 3/8" x 1-1/4" hex bolts,
twelve 3/8" washers and six 3/8" nylock nuts.
Tighten
.
See figure 7.
FIGURE 7
3/8" x 1-1/4"
HEX BOLT
3/8" x 3-1/4"
HEX BOLT
3/8" WASHER
3/8" WASHER
3/8" NYLOCK NUT
FIGURE4
5. Assemble a spacer tube, a 1" flat washer, a wheel
(valve stem facing out), and another 1" flat washer
onto the axle as shown in figure 4. Secure the wheel
with a cotter pin, spreading the ends of the pin.
Repeat on other end of axle.
6. Pump grease into grease fittings on wheels until
grease is forced out through ends of hubs.
COTTER
PIN
WHEEL
1" FLAT
WASHER
1" FLAT
WASHER
SPACER
TUBE
FIGURE 5
7. Tip the cart forward so that it rests on its wheels.
8. Assemble the front tongue on top of the rear tongue.
In the front set of holes, attach using two 3/8" x 1-1/4"
hex bolts, four 3/8" washers, and two 3/8" nylock nuts.
In the rear holes use one 3/8" x 4" hex bolt, two 3/8"
washers, and one 3/8" nylock nut. See figure 5.
HINT:
For easier assembly, support the rear tongue with
a block of wood.
3/8" NYLOCK NUT
3/8" NYLOCK NUT
3/8" x 1-1/4"
HEX BOLT
3/8" x 4"
HEX BOLT
3/8"
WASHER
3/8"
WASHER
3/8"
WASHER