Speedata SD60RT, Быстрый старт

Страница: 4 / 10

SD60 Quick start guide V1.0
第
4
页，共
10
页
Change default language
1 The default display language of the system is English. After the factory
settings or firmware upgrade, the system display language is restored to
English.
2
Click Settings
，
Click System > Languages & input > Languages > + Add a
language,
Select the language you want to add. Drag
,
drag the language
you want to change to the top, and the change is complete.
Barcode Scanning
1 Click Settings
，
Scan
，
Check
“Enable Scan”
, hold down the scanner key
on both sides of the fuselage, and you can use the quick scan.
2 Display Scan result: Check this option, the barcode results can be output at
the cursor focus after the bar code scanning is completed.
3 Scan warning tone: Check this option, can make a prompt tone after the
bar code scanning is finished. Select your favorite prompt tone in the “Scan
Audio” below, select the prompt tone. You need to re
-
check “Enable Scan”
4 Scan vibrate: Check this option, a vibrating alert can be sent after the
barcode scanning is completed.
5 Scan mode: The device has three built-in scanning modes, and you can
select your favorite quick scan mode. You need to re-check "Enable Scan"
again.
(1) Long Press Scan: In this mode, press and hold the scan button to turn
on the scanning laser, release the auto-shutdown laser, and if the bar