To Wash Clothes
IMPORTANT: Before using your new washer, make
sure the washer cord is connected to an appropriate
electrical outlet that is properly installed and connec-
ted to a protective earth/ground. Make sure the washer
hoses are connected to the hot and cold water faucets,
and that the faucets are turned on. Be sure the drain
hose is not kinked and is inserted into a drain. Refer to
the INSTALLATION INSTRUCTIONS for details of prop-
er washer installation.
IMPORTANT: Prior to first wash, use an all purpose
cleaner, or a detergent and water solution, and a damp
cloth to remove shipping dust from inside of wash
drum.
1. Get the clothes ready for washing. Empty pockets and
cuffs. Sort items into separate loads. Pretreat stains and
heavily soiled areas.
IMPORTANT: Remove all sharp objects from laundry
to avoid tears and rips to items during normal ma-
chine operation.
2. Measure and add low sudsing, High Efficiency (HE) deter-
gent to the washtub. Follow instructions on detergent pack-
age for amount to use.
NOTE: High efficiency (HE) detergent is recommen-
ded for use in this machine. Look for the HE logo or
“high efficiency” on the detergent’s label.
3. Add clothes loosely into the washtub (16 lbs. [7.2 kg] maxi-
mum dry clothes load).
TLW2323N_SVG
4. Close the lid. The washer will not fill, agitate or spin with
the lid open.
TLW2324N_SVG
WARNING
To reduce the risk of serious injury, do not by-
pass the lid switch or lid lock to permit the wash-
er to agitate or spin with the lid open.
W939
5. If not already on (control lights will be lit), turn on the wash-
er. Press the Power button to turn on the washer.
6. Select the cycle according to the type of fabric being wash-
ed. Refer to
section. If the selected cycle is not the
correct cycle for the fabric being washed, you may change
the cycle selection at any time until the first wash fill is
complete.
NOTE: The Normal Eco cycle is recommended for
everyday cottons and linens.
7. If desired change the Selections and Options settings.
8. Press the Start/Pause button to begin the cycle. The lid will
stay unlocked during the first fill so you can easily add
items. The lid will lock automatically after the initial wet-
down fill and before agitation begins.
NOTE: Lid must be closed for fill, agitation and spin
to start.
During the first fill when the Auto Fill Load Size is selected, wa-
ter fills to the minimum level programmed for the specific cycle
selected. Once the wash step begins, the control starts sens-
ing the load. Once sensing is complete more water may be
added to optimize wash results.
The washer will stop (pause) shortly before the wash and rinse
spins. They are a normal part of the cycle.
The lid will automatically unlock at the end of the cycle after a
short pause to ensure there is no washtub movement.
Pausing the Cycle
Although the lid stays unlocked during the first fill so you can
add items, you can also pause the cycle and unlock the lid.
NOTE: You can’t pause a cycle right after starting it.
There is a short delay while the machine is energizing.
If the lid is opened during fill or while Delay Start is active, the
cycle will pause and the display will alternate between
St
and
Control Panel
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
15
Part No. 203967ENR3
Содержание TR7003WN
Страница 2: ......
