ASSEMBLY INSTRUCTIONS
STEP 1:
Remove all the components from the crate. Inspect each piece for shipping damage. If any part is damaged,
contact your dealer or delivering carrier.
Page 7
NOTE
: This log splitter was partially assembled at the factory. Refer to the drawings and parts list should it become
necessary to disassemble the unit for repair or replacement of parts.
ITEM NO. DESCRIPTION
QTY.
1
Beam Assembly
1
2
Beam Lock Assembly
1
3
Tank Assembly
1
Tank Assembly (CA)
1
4
Tire and Wheel
2
5
Tongue Assembly
1
STEP 2:
Attach the two wheels (2) to the tank assembly (1) wheel spindles using the 3/4” light flat washers (3), 3/4” NF
slotted nuts (4), 1/8” x 1-1/2” cotter pins (5) and the hub caps (6). These items are in the hardware package.
Tighten the slotted nuts and make sure the wheels rotate freely.
ITEM NO. DESCRIPTION
QTY.
1
Tank Assembly
1
2
Wheel Assembly
2
3
3/4” Light Flatwasher
2
4
3/4” Slotted Nut
2
5
1/8” x 1-1/2” Cotter Pin
2
6
Hub Cap
2
