Spectrum SP-UV 200 Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 26

Spectrum SP-UV 200 Скачать руководство пользователя страница 4

1 Introduction

The SP-UV 200 is a single beam spectrophotometer. The instrument is compact, easy-to-use, and

ruggedness. The large sample compartment can accept various accessories and cell from 10mm to 100mm

path length. The built-in RS-232 serial interface enables the instrument to be connected to a printer.

The SP-UV 200 is ideal to use in a clinical laboratory, biochemical laboratory, petrochemical laboratory,

environmental protection and various fields of quality control. This user’s manual provides the description of

the SP-UV 200, a list of main specifications and available accessories.

After carefully unpacking the content, check the materials against the packing list to ensure that you

have received everything in good condition. If some parts are missing, damaged or have any other defects,

please contact you dealer or the sales representative immediately.

1.1 Warning and safety labels on SP-UV 200

The following warning and safety labels are located on the SP-UV 200:

Caution! Hazardous area. Do not remove this cover under any circumstances. Trained

service peoples only. No serviceable components inside. Select the right voltage.

Disconnect the power cable before opening the device cover or replacing fuses!

User’s Manual SP-UV 200 4
Spectrum Instruments

«
...
2
3
4
5
6
...
»

Содержание SP-UV 200



























Отзывы:

Нет отзывов