STANDARDS & CERTIFICATIONS
STANDARDS-
The equipment is manufactured in accordance with the IECEX scheme, the ATEX Directive 2014/34/EU and
with the following standards :
IEC 60079-0:2011
IEC 60079-1:2014
IEC 60079-31:2013
IEC 60529:2013
EN 60079-0:2012 + A11:2013
EN 60079-1:2014
EN 60079-31:2014
EN 60529:1991 + A1:2000 + A2:2013
ANSI/ISA 60079-0:2013
ANSI/UL 60079-1:2015
ANSI/ISA 60079-31:2015
ANSI/IEC 60529:2004
CAN/CSA-C22.2 No. 60079-0:2015
CAN/CSA-C22.2 No. 60079-1:2016
CAN/CSA-C22.2 No. 60079-31:2015
CAN/CSA-C22.2 No. 60529:2016TR CU 012/2011
GOST 31610.0-2014 (IEC60079-0:2011)
GOST IEC 60079-1-2011
GOST IEC 60079-31-2013
Specific Conditions of Use:
-The flameproof joints of the equipment are not intended to be repaired. Consult the manufacturer if dimensional
information on the flameproof joints is necessary.
-Follow the manufacturer’s instructions to reduce the potential of an electrostatic charging hazard on the surface
of the equipment in Group II and III environments.
NOTE:
Use a clean cloth dampened with pure water for cleaning.
CERTIFICATIONS-
CERT NO. FM18US0262X & FM18CA0126X
US: Class I Division 1 Groups BCD T5 Ta= -40°C to +55°C, Type 4X, IP66 Class
II/III Division 1 Groups EFG Ta= -40°C to +55°C, Type 4X, IP66
Canada: Class I Division 1 Groups BCD T5 Ta= -50°C to +55°C, Type 4X, IP66 Class
II/III Division 1 Groups EFG Ta= -50°C to +55°C, Type 4X, IP66
Class I, Zone 1, AEx/Ex db IIB+H2 T5 Gb Ta = -50°C to +55°C, Type 4X, IP66 Zone
21, AEx/Ex tb IIIC T85°C Db Ta = -50°C to +55°C, Type 4X,IP66
CERT NO. FM18ATEX0073X & IECEx FMG 18.0029X II 2
G Ex db IIB+H2 T5 Gb Ta = -50°C to +55°C, IP66 II 2 D Ex
tb IIIC T85°C Db Ta = -50°C to +55°C, IP66
CERT NO. RU 0690907
1Ex d II
В
+
Н
2 T5 Gb X Ta = -50°C to +55°C, IP66
Ех
tb III
С
T85 º
С
Db
Х
Ta = -50°C to +55°C, IP66
F101-P137(5,7,8)-BD REV 2 114309212018 F1XX
SERIES INSTALLATION REV-2A
6