Spectrum DX8, Инструкция по эксплуатации

Страница: 16 / 208

16 SPEKTRUM DX8 • RADIO INSTRUCTION MANUAL
To Access the Swash Type Function
Press and hold the roller while turning on the transmitter. When System Setup
appears on the screen, release the roller. The DX8 is now in System Setup Mode.
Rotate the roller to highlight Swash Type then press the roller to access the
function. The following screen appears:
Highlight the current swashplate type then rotate the roller to select the desired
swashplate mix. When the desired Swashplate mix is displayed press the roller
to select. In Systems Settings highlight User Name then press the roller to select
that function. Select the desired mode then press to accept.
SWITCh SELECT
The Switch Select function allows the switches, left knob and right and left
trimmers to be assigned to functions, channel or inhibit. In helicopter mode the
following options are available:
Trainer button
Inhibit Gear
Aux 2, Aux 3
Gyro, Mix,hold, Governor and Flight mode switches
Switch
Inhibit Gear
Aux 2 channel Aux 3 channel
Right knob
Gear Aux 2 channel Aux 3 channel
Throttle Pitch
Right and left trimmers
Can be assigned to one of the following:
Inhibit Hover Pitch
Hover throttle Gyro trim
Governor trim Gear Channel
Aux 2 channel Aux 3 channel
To Program the Switch Select Functions
Press and hold the roller while turning on the transmitter. When System Setup
appears on the screen, release the roller. The DX8 is now in System Setup Mode.
Rotate the roller to highlight the desired switch, knob or trimmer then press.
Select the channel or function you wish to assign. See chart for options. Press the
roller to accept. Note that a channel or function can only be assigned once.
Repeat to select all desired switch positions.
F-MODE SETUP
The F-Mode setup screen is used to assign the switches that will be used for
Flight Mode and Hold. Flight Mode setup is defaulted to Flight Mode -flight
mode switch and Hold- Inhibited.
You can assign the flight mode and hold functions to any of 9 switches including:
Inhibit, Aileron D/R, Elevator D/R, Rudder D/R, Gyro switch, Flight Mode Switch,
Hold and the Governor switch.
To Access the F-Mode Setup Function
Press and hold the roller while turning on the transmitter. When System Setup
appears on the screen, release the roller. The DX8 is now in System Setup Mode.
Rotate the roller to highlight F-Mode Setup then press.
The following screen appears:
Highlight the Flight mode or Hold function then press to access that function.
Rotate the roller to select the desired switch.
TRIM STEp
The Trim Step function allows servo movement adjustment per click of trim. For
example you usually want a large trim step (8 to 10) for a new model. Each click
of trim will have a large amount of trim travel so you can quickly adjust an out-of-
trim model in flight. Later you can use a finer trim step (1-5) to adjust for precise
flight. The Trim Step function allows the trims to be common or independent in
each active flight mode. Many helicopter pilots use independent trims because
they are automatically active when a flight mode is activated.
Important: The
trim step function has no effect on the overall trim travel, only the total number of
clicks available. If you select a 0 value in trim step, the trim is turned off.
EN