2
Innovative Power + Data Solutions
10 Mountain View Drive • Shelton, CT 06484 • P:800.521.3175 • F:203.924.6687 • www.electri-cable.com
©
ECA– October 2013—Product specifications subject to change without notice
INSTALL-DRIFTER-101413
Drifter™ Installation Instructions
and Technical Information
Drifter™ Technical Information
ETL Listed
Receptacle:
(3)15A 120 Volt Tamper Resistant receptacles compliant with 2011 NEC® code.
(6) USB charging ports that work with USB compatible devices.
USB Rating: 2100 mA 5V/DC.
108” Power cord.
Integral feet provide .75” floor clearance, and convenient cord storage.
Magnetic catch secures cord when not in use.
Integral anchor stud in the base allows the unit to be permanently anchored if desired.
Design allows for 360 degree power access.
Cautions & Warnings
WARNING: FAILURE TO FOLLOW CAUTIONS AND WARNINGS BELOW COULD RESULT IN ELECTRICAL SHOCK, FIRE,
PROPERTY DAMAGE, PERSONAL INJURY OR DEATH.
Cautions:
Read Instructions · Read all warnings and operating instructions before using.
Retain Instructions · Retain this instruction sheet for future use.
Never use in a wet environment. Never allow liquid of any kind to spill onto or enter any part of the Drifter.
Follow Warnings· Read and follow all warnings and directions in this instruction sheet and marked on Equipment.
Service · There are no user serviceable parts in this product. Do not open or modify this product in any manner.
Warnings:
Power Source · This product is only to be operated from the power source indicated on the product. Use only with
a grounded (neutral) conductor. For safety do not bypass or disable the third (grounding) pin.
Power Disconnection · To remove powered devices safely grasp device plug and pull straight from powered outlet.
Do not pull on device cord or remove plug from any angle other than straight from outlet. Never touch metal con-
ductors on plug during connecting or removal from product.
Power Cord · Route products power cords where they will not be stepped on, pinched, have devices placed on
them or become a tripping hazard. Never allow power cords to sit in any liquid or get wet in any manner.
Location · This product is intended to be used in a dry environment only.
