043548R8 Page 1 of 2
Assembly Instructions
Important
Before you begin, read and comply with all safety and operating instructions,
and ensure all parts and correct quantities are included.
Any parts damaged during shipment must be reported within 5 days of receipt.
To report information regarding missing parts or damage, to purchase parts
or accessories, or if you have any questions, please contact us.
www.spectrumfurniture.com
800-235-1262, 715-723-6750
Thank you for purchasing Spectrum products!
Micro Arm Keyboard Tray
95506
(1) 044480
Spacer block
1. Attach micro-arm bracket to keyboard tray
1. Align the micro-arm bracket with the 6 pre-drilled holes in the center of
the keyboard tray and attach with (6) #8 x 5/8” PHSM screws.
Figure 1
.
2. Tighten screws securely.
Figure 1
#8 x 5/8” PHSM
screws (6 required)
Phillips
screwdriver
Tools
Required
(5) 043878
Nylon spacer
1” x .375” OD
x .171” ID
(8) 026070
#8 x 1-3/4”
PHSM
(1) Slide guard
(1) 044321 Parts bag
(1) Rubber bumper
(8) #8 x 5/8” PHSM
Keyboard tray
Micro-arm bracket
Note: The spacers and longer screws are used between the slide and
worksurface only on worksurfaces with a 1” protruding support bar.
(1) 044217
Micro-arm
bracket
(1) 042342
17-3/4” Slide
(1) 043517
Keyboard tray
