When assembling Brick Walls, carefully align Wall tabs with each Wall. Dry fit each part before
applying glue. Apply glue sparingly on the assembly tabs and lower backside edge of wall.
Assemble the Parts and Sub-Assemblies In Sequence:
1.
Wall (13) to Base (1).
2. Main Entrance Roof (9) over Door (18) and Walls (8). The Main Entrance Roof (9) is
properly aligned and seated when the alignment channels on the BOTTOM of roof are
seated in top of Walls (8).
3. Wall (2) into Mounting locators on Main Entrance Roof (9). The Wall (2) should be
mounted
BEHIND
Walls (5) and (6).
4. Trim (11) to top of Mounting Ridge on Wall (4).
5. Trim (10) to top of Mounting Ridge on Wall (3).
brick wall, entrance roof and trim assembly
4
