3. Install T-supports
1. Align the T-supports with the worksurface mounting holes
as shown.
Figure 3
.
2. Tighten screws securely.
0118503 Page 2 of 3
Figure 3
T-Support
T-Support
(2) 1/4-20 x 1-3/4” PHMS
(2) 1/4-20 x 1-3/4” PHMS
Figure 2
Assembled
Legs
Worksurface
2. Attach Legs to Worksurface
1. Place the worksurface top-side down onto a non-abrasive surface.
2. Align the assembled legs with the worksurface mounting holes
and attach with the screws included with the legs. Be sure the
crank is on the bull-nose edge side of the worksurface.
Figure 2
.
3. Tighten screws securely.
Worksurface
