3
1. Remove gland plugs and
caps for the number of
sensor cables being used.
Unused glands should
remain plugged.
2. Run the sensor cables
through the gland caps and
then through the gland.
3. Plug stereo pin end of
sensor cables into the
WatchDog Micro Station
sensor ports.
4. Close the Enclosure lid.
Remove slack from sensor
cables by gently guiding
cables through the glands.
Kinking of cables in the
enclosure could damage
the wires.
5. Screw the gland caps onto
each gland. Using pliers
may be necessary.
