Spectrum Technologies FIELDSCOUT 6435, Руководство по эксплуатации продукта

Страница: 13 / 32

13
By default, the TDR350 gets the date and time from the satellite
signal. These values are displayed in the Settings Menu (p. 11).
The date and time can also be set manually. When the time and
date are set manually, they will over - ride the default value.
Note: When the batteries are removed, the date/time are reset
and the meter resumes getting this information from the satel-
lites.
Updating the Date and Time
1. Press the MENU|SELECT button to get to the Settings Menu.
2. Press the UP or DOWN arrows to navigate to either the Cur-
rent Date or Current Time option.
3. Press the MENU|SELECT button to access the Time/Date up-
date screen. There are 3 options.
A. Press the READ|DOWN button to download an update from
the GNSS satellites. Proceed to an area with a good view of the
sky and press the Menu/Select button to initiate the process.
B. Press the DELETE|UP button to set the date and time manual-
ly. The current settings will be displayed. Use the UP and DOWN
arrows to adjust the highlighted selection. Press the
MENU|SELECT button to confirm and proceed to the next pa-
rameter. After pressing the MENU|SELECT button to set the
minutes, the display will return to the Reading screen.
C. Press the ON/OFF|BACK button to return to the Settings
Menu without making any change.
Setting Date/Time