Symptom Cause Remedy
No
Power
Power cord is not Plug in power cord
plugged into AC wall firmly.
outlet.
Power on
theater
2000’” Turn on Power.
is not turned on.
No Sound
Faulty connections of Check connections.
RCA-type cables be-
tween components.
Tape Monitor
is not Turn on
Tape Monitor
selected on your receiver selection on the front of
or amplifier when using your receiver or ampli-
Tape Monitor
connec-
fier.
tion to
Theater
2000’“.
Appropriate input source Input selection must be
is not selected. set to
Input
if you are
using the
Best
Connec-
tion
which is the
Tape
Monitor
hookup (see
page 4).
If you are using
the
Alternate Connec-
tion (see
page
4), Input
I or 2
is selected, based
on the component selec-
tion.
Remote
Batteries are not Install batteries
Control
installed. correctly.
does not
work.
Direct sunlight is strik-
Change the position of
ing the remote control the main unit.
sensor of the main unit.
-6-
SMARTHOME.COM™ 1-800-SMART-HOME 949-221-9200 http://www.smarthome.com Order #8234