0111414R2 Page 6 of 8
5. Route Cords
A. On the instructor-side of the cart (outlet-side) route the USB cord from the
feeder hub under the shelf up the inside wall of the cart to the worksurface.
Figure 5A
. The cord can be secured using the plastic cord clip inside the
cart.
B. Route the power cords from all the hubs down the inside wall of the cart.
Figure 5C
. The cords can be secured using the plastic cord clip inside the
cart.
C. Mount the auxiliary power strip to the bottom of the cart with Velcro
®
and
switch off.
D. Plug the (4) USB hub power adapters into the auxiliary power strip. The
plugs will have to be staggered using every other outlet.
Figure 5D
.
Figure 5
cord reel
USB cord from
feeder hub
Auxiliary Power Strip attached to
base panel w/ Velcro
®
(shown w/
USB Hub Adapters plugged in)
USB hubs
plastic cord clip
Figure 5A
Figure 5B
Figure 5C
Figure 5D
“feeder” USB hub
outlets for tablet
chargers
