0112625 Page 2 of 10
Handle Assembly
Handle Assembly
1.
Attach the handle to the cart with (4) 1/4-20 x 15mm JC bolts
and tighten securely.
Figure 1
.
(4) 0105648
cord wrap bracket
Safety
Safety
Hardware Package Contents
Hardware Package Contents
Assembly / Setup
Assembly / Setup
Figure 1
• Read this owner’s manual before assembly or operation.
• Do not allow children to move cart.
• Move slowly and carefully when mobile.
• For indoor use only. Do not install or store the unit where it will be exposed to weather. Keep unit dry.
• For added safety, plug the unit into a grounded three-prong receptacle controlled by a GFI
(Ground Fault Interrupter) circuit breaker.
Phillips screwdriver
4mm hex wrench
(included)
1/4-20 x 15mm JC bolts
(4 req’d)
(12) 052605
1/4-20 x 15mm JC bolts
Handle
Tools Required
Tools Required
(1) 025039
4mm hex wrench
Cord Wrap Bracket Assembly
Cord Wrap Bracket Assembly
1.
Attach the (4) cord wrap brackets to the outside of the cart with 1/4-20 x 15mm JC bolts
(2 each) and tighten securely. Be sure the brackets are facing away from each other as
shown.
Figure 2
.
2.
Wrap the power cord around the brackets as necessary.
Cord Wrap Bracket
(attach with two 1/4-
20 x 15mm JC bolts)
Cord Wrap Bracket
(attach with two 1/4-
20 x 15mm JC bolts)
Power Cord
Figure 2
