0116554R2 Page 2 of 5
Figure 1B
1/4-20 x 30mm
JC bolts
(6 required)
2. Remove the (6) 1/4-20 x 30mm JC bolts, and 1/4-20 locknuts
and set the mount aside. Retain all fasteners.
Figure 1B
.
1/4-20 locknuts
and washers
2. Install shroud base plate
1. Two sets of mounting holes are available for the shroud / monitor
mount. Choose a set of holes based on your monitor size and
preferred height.
Figure 2A
. Typical installations use the upper
holes for better viewing and clearance.
Two-vertical positions available
Figure 2A
Monitor
mount
plate