Tools Required
Tools Required
Wall
0190405 Page 2 of 2
925 FIRST AVENUE, CHIPPEWA FALLS, WI 54729 / 800-235-1262 / 715-723-6750 / WWW.SPECTRUMFURNITURE.COM
© 2017 Spectrum Industries Inc., All rights reserved.
2. Install L-bracket and screw to wall
1. Attach the L-bracket to the top of the unit (using slotted hole)
with (1) #8 x 3/8” PHSM screw.
Figure 2
.
2. Install the 3rd #14 x 1-3/4” PHSM screw through the
L-bracket into the wall.
1. Attach the L-bracket to the unit (using slotted hole) with (1) #8 x 3/8”
PHSM screw.
Figure 2
.
2. Mark the L-bracket hole location onto the wall.
3. Lift the unit off the wall hanger bracket.
4. Using a hammer drill with 3/16” masonry bit, drill into the wall at the
marked location (approximately 1-1/2”D).
5. Place unit back onto wall hanger bracket
6. Install the 1/4” x 2-1/4” Tapcon Hex screw through the L-bracket.
(1) 0132697
1/4” x 2-1/4” Tapcon
Hex screw
(1) 0101381
#14 x 1-3/4” PHSM
Ratcheting
wrench
with 5/16”
socket
3/16”
Masonry
drill bit
Hammer
drill
Wood stud wall
Concrete wall
(1) 0190174
#8 x 3/8” PHSM
screw
(1) 0190174
#8 x 3/8” PHSM
screw
L-bracket
Figure 4
Phillips
screwdriver
Drill
or
Phillips
driver
Phillips
screwdriver
Drill
or
Phillips
driver
(1) #14 x 1-3/4” PHSM
or
(1) 1/4” x 2-1/4” Tapcon
Hex screw
(1) 0190174
#8 x 3/8” PHSM
screw in slotted hole
