0190576R1 Page 2 of 2
925 FIRST AVENUE, CHIPPEWA FALLS, WI 54729 / 800-235-1262 / 715-723-6750 / WWW.SPECTRUMFURNITURE.COM
© 2018 Spectrum Industries Inc., All rights reserved.
2. Attach Flip-up shelf assembly
1. Extend both shelf brackets fully.
2. Align the brackets with both sets of “tri-holes” as shown.
3. Attach the shelf with (4) 8-32 x 1/2” PH thread-cutting screws using
the holes shown.
Figure 2.1
and
Figure 2.2
.
4. Tighten screws securely.
5. Install 2” grommet.
Figure 3
3. Operation
The shelf will automatically lock into place when lifted into the horizontal
position with the levers released.
Figure 3
. To lower or flip-up the shelf,
press and hold the levers under each folding shelf bracket at the same
time while slowly lowering or raising the shelf. Do not exceed a maximum
of 25 lb of weight on the shelf. Do not move the unit while the shelf is in
the horizontal position.
Note: Wiring for document cameras or laptop computers placed on the
flip-up shelf should be routed on top of the audience-side of the shelf.
Use of the shelf grommet hole for wiring will result in pinching of the
cords when the shelf is folded.
CAUTION
Keep clear of pinch points during shelf movement.
Do not exceed 25 lb [11.35 kg] of weight on shelf.
Release lever
(press here)
Figure 2.2
Upper right hole
Upper hole
2” Grommet
Flip-up shelf assembly
(4) 8-32 x 1/2” PH
Thread-cutting screws
Left Bracket
Right Bracket
Figure 2.1
