Failure to follow these safety instructions could result in gas leakage, injuries,
damage to the gas pressure regulator (PRREG) or other property. Read all the safety information
below before using PRREG.
Handling
Handle PRREG with care. PRREG is not designed for extreme conditions, rough handling, vibration,
shock or drop. Keep PRREG away from heat, flame, strong sunlight, water, dust, soil or mud. Do not use a
damaged PRREG.
Repairing
Do not troubleshoot, disassemble or tamper with PRREG. Do not attempt to repair or replace any
component by yourself.
Hydrogen
Follow all local rules and regulations for safe handling, storage and usage of Hydrogen gas. Do not
smoke when operating PRREG. It is recommended to operate in a well ventilated environment.
Pressure
Never operate beyond PRREG’s rated inlet pressure of 350bar.
Connectors and ports
Never force a connector into a port or apply excessive pressure. If the connector and port
do not join with reasonable ease, they probably do not match. Check for obstructions and ensure that the
connector matches the correct port.
High-consequence activities
PRREG is a customized system with pending safety tests and certifications. It is not
intended for use where the failure of the system could lead to death, personal injury or severe environmental
damage.
Disclaimer
Every effort has been made to ensure that the information in this manual is accurate. This manual
serves to adequately recommend safe operating procedures, but shall not be treated as comprehensive. Do not
use PRREG in any other way than the one recommended in this manual. Spectronik reserves the right to change
system specifications, appearance or discontinue the product at any time.
Warranty
Spectronik warrants the included hardware product and accessories against defects in materials and
workmanship for 1 year after delivery. Spectronik does not warrant against normal wear and tear, nor damage
caused by accident or abuse.
To obtain service, contact
SAFETY, HANDLING & SUPPORT
WARNING:
© 2022 Spectronik Pte. Ltd., All Rights Reserved.
Spectronik, the ‘S’ logo, and PROTIUM are registered trademarks of Spectronik Pte. Ltd.
