Spectronik MGPR Скачать руководство пользователя страница 2

Failure to follow these safety instructions could result in gas leakage, injuries, damage

to the Miniature Gas Pressure Regulator (MGPR) or other property. Read all the safety

information below before using MGPR.

Handling

Handle MGPR with care. MGPR is not designed for extreme conditions, rough handling, vibration, shock

or drop. Keep MGPR away from heat, flame, strong sunlight, water, dust, soil or mud. Do not use a damaged
MGPR.

Repairing

Do not troubleshoot, disassemble or tamper with MGPR. Do not attempt to repair or replace any

component by yourself.

Hydrogen

Follow all local rules and regulations for safe handling, storage and usage of Hydrogen gas. Do not

smoke when operating MGPR. It is recommended to operate in a well-ventilated environment.

Pressure

Never operate beyond MGPR’s rated inlet pressure of 350bar.

Connectors and ports

Never force a connector into a port or apply excessive pressure. If the connector and port

do not join with reasonable ease, they probably do not match. Check for obstructions and ensure that the
connector matches the correct port.

High-consequence activities

MGPR is a customized system with pending safety tests and certifications. It is not

intended for use where the failure of the system could lead to death, personal injury or severe environmental
damage.

Disclaimer

Every effort has been made to ensure that the information in this manual is accurate. This manual

serves to adequately recommend safe operating procedures but shall not be treated as comprehensive. Do not
use MGPR in any other way than the one recommended in this manual. Spectronik reserves the right to change
system specifications, appearance or discontinue the product at any time.

Warranty

Spectronik warrants the included hardware product and accessories against defects in materials and

workmanship for 1 year after delivery. Spectronik does not warrant against normal wear and tear, nor damage
caused by accident or abuse.

To obtain service, contact

[email protected]

SAFETY, HANDLING & SUPPORT

© 2022 Spectronik Pte. Ltd., All Rights Reserved.
Spectronik, the ‘S’ logo, and PROTIUM are registered trademarks of Spectronik Pte. Ltd.

WARNING:

Содержание MGPR











Отзывы: