It is strictly prohibited to use the monitor with damaged components if these components ensure ex-
proofing.
6
TROUBLESHOOTING
ATTENTION!
Do not disassemble the monitor without prior powering off the line.
Troubleshooting procedure shall be performed in the following sequence:
1.
Check the power of the monitor.
2.
Check power of the transmitter.
3.
Check availability of video signal at the transmitter input.
4.
Check integrity and connection on the line from the monitor to transmitter.
5.
Check for correct connection of the monitor in compliance with connection diagrams of the
present OM.
6.
Check contacts in terminal clamps and in the signal line.
In all other cases if the defect is not cured by other means specified above, sent the monitor to the
manufacturer. Additional information available by tel. +7(343)379-07-95 or by e-mail support@spectron-
ops.ru.
7
REPAIR AND RETURN OF THE DEVICE
If any defects or failures occur, the Customer solely issues a failure certificate with the defect
description. The monitor along with the product passport and certificate shall be returned to the
manufacturer.
Type of the monitor packaging is described in section 9 “Transportation and storage”.
In case of return, please dispatch the product to the address:
2D Lenin St., Beryozovsky, Sverdlovsk Oblast, 623700, Russia. tel.: +7(343)379-07-95.
8
MANUFACTURER’S WARRANTY
Specified lifetime for the monitor is 10 years minimum.
Warranty period is 12 months since commissioning, but not longer than 48 months since sale.
After 24 months of service, supplementary warranty period shall be issued via service
WARRANTY EXTENSION at http://spectron-ops.ru/.
Warranty repairs are in compliance with GOST R IEC 60079-19 and the monitor shall be replaced
by the manufacturer only if the Customer follows all transportation, storage and operation
requirements.
The Manufacturer shall not accept any claims when the warranty period expires, or if the product
passport for the monitor is not provided or if the Operating Manual is not followed; or in case if
connection patterns not designated by the Manufacturer are used.
9
TRANSPORTATION AND STORAGE
For transportation, the monitor shall be packed in a factory package or suitable box, wrapped in air-
bubbled film, foam core or other shock absorbent material. If several items are packed in one box,
spacers must be placed between them.
It is allowed to transport the monitor at any distance by any transport. Protection of the
transportation package from precipitation must be provided for the period of transportation.
During loading and off-loading and during transportation, the monitor shall not be exposed to
shocks or atmospheric precipitation. During transportation, the box with the monitor shall be placed in
such a manner so that to prevent uncontrolled relocation.
10
ORDERING INFORMATION
The scope of monitor supply includes:
Monitor
1 pc.;
