REPLACING YOUR DATA LOGGER’S BATTERY
Your data logger is provided with a 3.6V 1/2AA battery already installed. You can change the battery by following the instructions below.
3
4
1
2
STARTING YOUR DATA LOGGER
Select how the LCD should function,
and what happens when your logger
is full.
Set high and low alarms if required.
Name your logger and select the
logging rate.
Click on the ‘Set up and start the
USB data logger’ button.
If you would like advice on how
best to use the data logger for
a particular application, please
contact your nearest Lascar
representative.
Your logger is now
ready for use.Remove
from the USB port.
Set restrictions for stopping the
logging session.
Select when you would like the
logging session to start.
IMPORTANT SAFETY INFORMATION
Disposal and Recycling Information
You must dispose of Lascar products in accordance with relevant laws and regulations. They contain
electronic components and lithium batteries and therefore must be disposed of separately from
household waste.
Repairing or Modifying
Never attempt to repair or modify Lascar products. Dismantling them, other than for the purpose of
changing replaceable batteries, may cause damage that is not covered under the warranty. Servicing
should only be provided by an authorized supplier.
Disclaimer:
Every effort has been made to ensure the accuracy of this publication and no responsibility or liability can be accepted by Omega for any errors or
omissions in the content of this document. Data and legislation may change, and so we strongly advise you to obtain and review the most recently
issued regulations, standards, and guidelines. This publication does not form the basis of a contract.
For more information, and to download the latest version of the software
free of charge, visit:
www.omega.com
