manualshive.com logo in svg

Spectris HBM U2B, Инструкция по монтажу

Поделиться
Скачать
Spectris HBM U2B Скачать руководство пользователя страница 5

5

U2B

HBM 24.5.2000

In these mounting instructions remaining dangers are pointed out using the
following symbols:

Symbol:

DANGER

Meaning:  Maximum danger level
Warns of an imminently dangerous situation in which failure to comply with
safety requirements will result in death or serious physical injury.

Symbol:

WARNING

Meaning:  Potencially dangerous situation
Warns of a potentially dangerous situation in which failure to comply with
safety requirements can result in death or serious physical injury.

Symbol:

CAUTION

Meaning:  Possibly dangerous situation
Warns of a potentially dangerous situation in which failure to comply with
safety requirements could result in damage to property or some form of
physical injury.

Symbol:

 

NOTE

Means that important information about the product or its handling is being
given.

Symbol:
Meaning: CE mark
The CE mark enables the manufacturer to guarantee that the product
complies with the requirements of the relevant EC directives (see Declaration
of Conformity at the end of this document).

SUNSTAR传感与控制 http://www.sensor-ic.com/ TEL:0755-83376549 FAX:0755-83376182 E-MAIL:[email protected]

SUNSTAR自动化 http://www.sensor-ic.com/ TEL: 0755-83376489 FAX:0755-83376182 E-MAIL:[email protected]

Содержание HBM U2B

























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды