ADDENDUM TO THE CP/M MANUAL
5-7
Step 6.
Insert the source disk into the disk drive and
press ENTER . COPY707 will read the file into
the computer's RAM. Once a file is read, the
program will print the file I s name with the
"read ok" message.
If there is more than one file to copy,
COPY707 will continue to read files until the
RAM allocated for file storage (buffer) is
filled. An "incomplete" message will appear
next to the name of the file that was being
copied when the buffer was filled.
Step 7.
Insert the destination disk and press ENTER in
response to the message "insert destination
...".
Once a file is copied, its file name and the
"copy ok" message is printed.
If some of the files where not completely
loaded in step 6, steps 6 and 7 will be
repeated until all files are loaded from the
source disk and copied to the destination
disk.
When all files are copied the "copy complete"
message will appear.
