14205603-IG, Edition 3.0
July 2017, Original document
13
Adding Users and Handsets
Each individual DECT user/handset must be added to the Spectralink IP-DECT/DECT Server and
later on to the Cisco Unified Communications Manager.
This section describes how to add the handsets to the Spectralink IP-DECT/DECT Server.
To Add Users to the IP-DECT/DECT Server from the Web Based Administration
Page
1. If using Spectralink IP-DECT 400/6500, click
Users
, click
List Users
, and then click
New
.
If using Spectralink DECT 2500/8000, click
Users
, click
Overview
, and then click
New
.
2. Enter the required information:
Field
Setting
Interface
(only Spectralink DECT Server 2500/8000)
Line type
Select
SIP
.
DECT device
IPEI (optional)
If a specific handset is being subscribed for this
extension, enter the IPEI number of the actual
handset. (The IPEI number is readable from the
label on the product). If this is not the case this
field can be left empty and it will auto-fill when
the handsets subscribe.
Note: A SIP REGISTER will not be sent before
there is an IPEI number present.
Access code (optional)
Admins can define a system wide or individual
access code as extra wireless security during
the subscription process.
Note: Some 3rd party phones may need an
Access code to register to the Spectralink IP-
DECT/DECT Server.
User
Local Number (DN) (only Spectralink
DECT Server)
The local number (DN) is required on Spec-
tralink DECT Server 2500/8000.
Spectralink IP-DECT Server 400/6500 and Spectralink DECT Server 2500/8000 Interoperability Guide
