SpectraLink 8400 Series Скачать руководство пользователя страница 41

Страница: 41 / 134

Deploying SpectraLink 8400 Series Handsets

For more information, see

Setting Up an FTP Server

on page

105

To set up the provisioning server:

On your computer, create a folder to store the UC Software executable

and the configuration files that come with the UC Software.
For example,

C:\SpectraLink8400

Copy the latest UC Software from the WCS to the provisioning server.
See step

Set Up the FTP Server

on page

Extract all files from the UC Software ZIP file to the newly created folder

maintaining the same folder hierarchy.
Although the ZIP file contains many files, the following files are the only

ones you need:

— 3111-36150-001.sip.ld

(for SpectraLink 8440)

— 3111-36152-001.sip.ld

(for SpectraLink 8450)

— 000000000000.cfg
— SoundPointIPWelcome.wav

(welcome tone)

For a detailed description of each file contained in the UC Software ZIP

file, see the

Release Notes

found at

http://support.polycom.com/support/spectralink8400

Start the FTP server software and configure it to accept requests from the

handset.
In the FTP server software on a computer, create a unique user with names

and passwords.
For more information on how to set up the server, see your server

documentation.

You will use this provisioning server to maintain the handset’s configuration

and, periodically, update the software in the future.

Note

By default, Polycom sets FTP as the provisioning protocol on all SpectraLink 8400
Series handsets.

The default provisioning server protocol is FTP and is the focus of this deployment
guide. Other supported protocols include TFTP, HTTP, and HTTPS.

Содержание 8400 Series







































































































































Результаты поиска

Содержание 8400 Series

Отзывы:

SpectraLink 8400 Series, Руководство по развертыванию, Страница: 41 / 134

Результаты поиска

Содержание 8400 Series

Отзывы: