E-5
AC OPERATION
1. Connect the ac POWER CORD (#15) to an AC outlet.
2. Rotate the POWER/VOLUME ON/OFF SWITCH (#7) clockwise to turn on the system.
The POWER INDICATOR (#6) will light up.
ANTI-SHOCK LOCK DOWN SCREW
The turntable on this unit features a built in Anti-Shock system, and the turntable is
locked down when shipped from the factory. Turn the ANTI-SHOCK LOCK DOWN
SCREW
(#2), in a clockwise direction to release the turntable and activate the anti-shock
feature before using the turntable.
STEREO PHONOGRAPH OPERATION
Please Note - Before Use
-
Remove the stylus protector.
-
Keep the BLUETOOTH SWITCH (#8) in high position
-
Make sure that the tone arm is unlocked and free to move
from the tone arm rest prior to operating. Lock the tone
arm again when not in use.
1. Raise the JTA-455 DUST COVER (#1).
2. Rotate the POWER ON/OFF AND VOLUME CONTROL KNOB (#7) clockwise to turn
on the JTA-455
3. Place the record on the platter [use the 45 RPM ADAPTER (#3)
if you are playing 45 RPM records].
4. Set the 33/45/78 RPM SPEED SELECTOR (#5) to the proper
position for the record you are playing.
5. Lift the tone arm from the rest and slowly move it over the record..
The turntable platter will begin sprinning.
6. Place the tone arm down onto the record at the location that you
want to play.
7. Adjust POWER ON/OFF AND VOLUME CONTROL KNOB (#7) to the desired
level.
8. At the end of record, the platter will automatically stop rotating. Lift the tone arm
from the record and return it to the rest.
9. To stop playing manually, lift the Tone Arm up from the record and return it to the
arm rest.
Remark : As some kinds of record the auto-stop area was out of the unit setting, so it will
stop before the last track finish. In this case, select the auto-stop switch (#13) to “ off
“ position, then it will run to the end of the record but will not stop automatically (turn off
the unit by power switch or switch back the AUTO STOP SWITCH (#4) to “on“ position to
stop the platter rotate). Then put back the tone arm to the rest position.
BLUETOOTH CONNECTING AND PLAYBACK
Pairing a Bluetooth enabled device with the TT-933BPC.
1. Rotate the POWER/VOLUME ON/OFF SWITCH (#7) clockwise to turn on the
JTA-455.
2. Press BLUETOOTH BUTTON (#8) and select Bluetooth mode.
3. The BLUETOOTH LED INDICATOR (#9) will flash and go into
