Spectra 153281 Скачать руководство пользователя страница 7

Spectra GmbH & Co. KG  
sales@spectra.de

Sales offi ce Austria 
sales@spectra-austria.at

Spectra (Schweiz) AG  
sales@spectra.ch

| 7

INSTRUCTIONS FOR SPECTRA INDUSTRIAL PC SYSTEMS

3. BEFORE USE

3.1 TRANSPORT & STORAGE

Please check the packaging for possible transport damage. Check the accessories. 
Observe the transport and storage conditions described in the data sheet and ensure that they are observed. Before 
commissioning, the device must be accustomed to the ambient conditions for at least two hours. Store the device in 
a dry room. Make sure that the storage temperature is as low as possible. Protect the device from direct sunlight.

3.1.1 LITHIUM BATTERY

The industrial PC contains only one or two button cells with a lithium content <1g and a nominal energy <20 Wh. 
This means that special regulation 188 of UN3090 / UN3091 is given, since no special documents or inscriptions 
are required for transport.

3.2 INSTALLATION & MOUNTING

3.2.1 LOCATION & MOUNTING POSITION

Place the unit on a non-slip fl at surface in accordance with the installation position defi ned in the data sheet. 
Unless otherwise expressly stated in the data sheet, the unit must not be placed on inclined surfaces and must 
be protected against vibrations. Depending on the condition of the surface and the plastic materials of the feet, 
damage may be caused by imprints.
Make sure that any ventilation openings are not covered. Leave suffi cient space around the unit to walls and covers 
so as not to obstruct the necessary air circulation. Failure to do so may result in overheating.
Take care not to place the device in the immediate vicinity of heat sources or direct sunlight or strong light sources. 
The maximum permissible ambient temperature must not be exceeded.
Unless otherwise stated in the data sheet of the IPC, the following ambient conditions apply:
Temperature range: +5 °C to +35 °C
Relative humidity: 10 % to 80 %.
Air pressure: 700 to 1100 hPa and 2000 m  

Use the supplied accessories. 
The unit is not protected against moisture penetration. Protect the device from splashing water. 
Ensure that the environment is as dust-free as possible. When installing the unit, take into account the possible 
contamination. Depending on the degree of soiling, maintenance cycles must be provided for cleaning the air fi lters 
and fans.
Avoid mechanical distortion when installing the product.
Make sure that the cables and connectors are securely connected to prevent them from coming loose on their own. 

Содержание 153281

















Отзывы: