7
Product Water Path
Product Outlet.
Make sure that there is no restriction in the product line.
The hose should be filling vessels or a tank through an air
gap. Do not plumb this hose into the bottom of a tank,
allow the water to fall into the top of the tank.
Pressure
in the product tubing must never exceed 5psi (0.3bar)
at
any time, (running or stopped) or the membrane will be
permanently damaged.
There are four
(1/8”
NPT)
product water ports (2 in each
end cap)
Clear product water tubing with quick
-
connect
Product Flow meter
