Spectra Precision SP90m, Руководство пользователя

Страница: 103 / 164

91
caster, of the NTRIP servers (bases) and of the different
users.
Protecting Mount
Points
Protecting mount points may be done in an indirect way, as
explained below:
• Not assigning a mount point to any of the registered users
implies that this mount point is accessible to anyone who
can make an IP connection to the NTRIP caster.
Besides, the NTRIP caster may list mount points that are
not registered as managed by the NTRIP caster. If such
mount points are available, anyone who can make an IP
connection to the NTRIP caster will be allowed to connect
to these mount points.
• Conversely, from the moment a mount point is assigned to
a registered user, this mount point is no longer accessible
to all. Only registered users explicitly granted the right to
connect to that mount point will actually be able to do so.
As the administrator of the NTRIP caster, you can for
example create a user for the sole purpose of protecting
your mount points. Allowing this user to connect to all
your mount points will amount to placing a protection,
with immediate effect, on all these mount points,
preventing anyone else to connect to them. Then you can
gradually add new users allowed to connect to one or more
of the protected mount points.
• In order to keep the NTRIP caster accessible to a
maximum of registered users, you can limit the number of
simultaneous connections allowed per user. Too many
simultaneous connections from one user would indeed
limit the number of possible connections for all other
users.
• Warning! Having registered users not assigned to a single
mount point means they can access all the mount points
managed by the caster!