Spectra Precision FOCUS 35, Руководство пользователя

Страница: 52 / 111

FOCUS 35 TOTAL STATION USER GUIDE
4 – Setup
52
Activating or changing the PIN code
1. On the Face 2 display, press
N
or
O
to scroll up or down until you see Set PIN and then press
P
.
2. Press
N
or
O
to enter the PIN of your choice digit by digit—press
P
to accept each digit.
3. After all digits have been set, press
P
to record the pin.
The menu returns to Set PIN .
Using the PIN code to unlock the instrument
When the PIN code has been activated, you must enter it when you start up the Instrument. To do
this:
1. Switch on the FOCUS 35 instrument. The Face 2 display shows the menu Enter PIN .
2. Press
N
or
O
to enter the PIN of your choice digit by digit—press
P
to accept each digit.
3. Once all valid digits have been entered, press
P
. This unlocks the instrument—the Face 2 display
now shows the menu Instrument Status , the Radio Channel, and the Network ID.
If an incorrect PIN code is entered more than ten times, the instrument is locked and the PUK code
must be entered, see
PUK code, page 52 . When the correct PUK code is entered, the PIN code is
reset to 0000 and the security PIN code is deactivated.
PUK code
The PUK (Personal Unlock Key) code is factory set on each instrument and cannot be changed by the
user.
If the PUK code has been lost, contact your authorized Spectra Precision distributor to retrieve it.
1. If an incorrect PIN code is entered more than ten times, the Error menu appears on the Face 2
display with the error message Invalid PIN and Instrument Locked and shows the softkeys PIN
and PUK .
2. Press PUK . The Enter PUK menu appears on the F2 display and shows PUK: 000000000000 "
3. Press
N
or
O
to enter the PUK code digit by digit—press
P
to accept each digit.
4. Once all valid digits have been entered, press
P
. The FOCUS 35 instrument is unlocked, the PIN
code is reset to 0000 and the security PIN code is deactivated.
If an incorrect PUK code is entered (any number of times), Error menu appears on the Face 2 display
with the softkeys Cancel and Retry . Select Retry to enter the PUK code again or select Cancel to
abort the procedure.