Spectra Precision Epoch 25 L1, Руководство пользователя

Страница: 43 / 50

Epoch 25 L1/L2 GPS System User Guide
41
Troubleshooting
B
Reference receiver is
not broadcasting. Port settings between
reference receiver and radio
are incorrect. Use use WinFlash to verify the
receiver settings.
Faulty cable between
receiver and radio. Try a different cable.
Examine the ports for missing pins.
Use a multimeter to check pinouts.
No power to radio. If the radio has its own power
supply, check the charge and
connections.
Roving receiver is
not receiving radio. Reference receiver is not
broadcasting. Use field software to check radio
frequency settings.
Incorrect over air baud rates
between reference and
rover. Connect to the roving receiver’s
radio and check to ensure it has the
same setting as the reference
receiver.
Incorrect port settings
between roving external
radio and receiver. If the radio is receiving data (the
Memory LED is flashing) and the
receiver is not getting radio
communications, use the PDL Config
utility to check that the port settings
are correct.
Issue Possible cause Solution