Spectra Logic Spectra nTier500 Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 112

background image

Introduction

Implementing nTier Deduplication

8

Advanced VTL Configuration

In the Advanced VTL Configuration, the backup software manages backups to the
virtual tape library while the VTL appliance controls the export of data from virtual
tapes to physical tapes.

VTL dramatically accelerates backups by
acting as a

de facto

cache to your

physical tape library and enables data to
be moved to physical tapes as a
background process without impacting
production servers. This innovative
approach to backup addresses the
limitations of conventional tape backup.
Moreover, since VTL manages the export
of data from virtual to physical tapes,
there is no additional overhead for the
backup server.

With the Advanced VTL Configuration,
backups to virtual tapes occur very
quickly. Then, at a later time, when you
are done using a given tape, you can
export data to physical tape for offsite
vaulting or disaster recovery without
impacting the production environment.
VTL can also be set up in Auto Archive
mode so that after each backup to virtual
tape completes, data is automatically
exported to physical tape.

The Advanced VTL Configuration
requires you to set up the initial physical

tape library emulation from within the VTL Console so that there is a 1:1 mapping,
with identical barcodes, between virtual and physical tapes. This enables the
backup software to keep track of backup tapes and prevents tapes from being
created that would be unidentifiable by the backup software.

Whenever data is written to physical tape, the virtual tape can then be deleted or the
copy can be left on the virtual tape for rapid recovery. The physical tape will always
have the same barcode as its virtual tape counterpart. This gives you the flexibility to
easily restore from either virtual or physical tape.

When it comes time to restore, the backup software identifies the barcode of the
tape containing the needed data. If the data still resides on virtual tape (it was never
exported or it was exported with the virtual tape left intact), it can be restored very
quickly because it is being read from disk. If the data is only on physical tape, the
tape must first be re-imported into VTL with a few simple keystrokes in the VTL
Console so that the backup software can access it and restore in its usual manner.

nTier VTL with

FalconStor

software

Backup to

virtual tape

Advanced Configuration

Backup to

physical

tape using

VTL Export

Backup server

Spectra tape
library

«
...
9
10
11
12
13
...
»

Содержание Spectra nTier500

















































































































Отзывы:

Нет отзывов

Похожие инструкции для Spectra nTier500

Бренд: Adobe Страницы: 822

Certificate Management System 6.2

Бренд: Netscape Страницы: 874

Бренд: Novell Страницы: 64

Бренд: Avaya Страницы: 20

V850 ZigBee Pro

Бренд: NEC Страницы: 59

Storage Manager Configuration Setting

Бренд: NEC Страницы: 68

Бренд: NEC Страницы: 68

Storage ReplicationControl SQL Option

Бренд: NEC Страницы: 104

Storage Performance Monitor/Optimizer

Бренд: NEC Страницы: 184

Storage Manager IS015-9E

Бренд: NEC Страницы: 200

Storage Manager Messages

Бренд: NEC Страницы: 499

Storage Manager

Бренд: NEC Страницы: 710

WISE MOBILE DEVICE PACKAGE EDITOR 7.0 SP2

Бренд: Symantec Страницы: 22

WISE LINUX PACKAGE EDITOR 8.0

Бренд: Symantec Страницы: 69

D-NE1 - Portable Cd Player

Бренд: Sony Страницы: 2

Diabetes Management Software v2.2

Бренд: OneTouch Страницы: 13

Topo North America 9.0

Бренд: DeLorme Страницы: 257

Бренд: 3Com Страницы: 44

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды