Chapter 4 - Installation
Installing the Spectra BlackPearl NAS Solution in a Rack
2.
If necessary, remove the front bezel of the BlackPearl NAS solution. The bezel is held in
place with magnets. Grasp the sides of the bezel and pull it straight off the chassis.
3.
Position the chassis in front of the rack rails and lift it so that the inner rails are at the
same height as the extended sections of the outer rails attached to the rack.
Figure 37
Extend outer rails and slide chassis into rack.
4.
Slide the chassis into the rack until the self-locking latches engage.
January 2022
Installation Guide-Spectra BlackPearl NAS Solution
- 48 -
