Wireless Mode
1. Play/Pause & Answer/End incoming calls: Press ONCE on one of the multi-function button of
TWS earbuds
2. Reject incoming calls: Press & hold one of the multi-function button of T328 earbuds
3. Redial last incoming caller: Press twice quickly on one of the multi-function buttons of T328
earbuds
4. Volume control/previous & skip songs must be controlled directly on your audio device
NOTES:
-
Although each earbud has a built-in microphone, only the microphone on Primary earbud can
be used in Stereo mode
-
Music will automatically stop playing when the T328 earbuds are placed in the wireless
charging receiver. When both earbuds are removed from the T328 wireless charging
receiver, press play on your electronic device to resume playing music.
To Charge the T328
a) Earbuds:
1. Remove clear plastic tabs from wireless charging receptors
2. Place T328 earbuds into the charging slots (see #12 on Product Map above). The T328
charging case will automatically power ON once the T328 earbuds are placed in the charging
slots.
3. Red LED on Left & Right earbuds, and Blue LED on Charging Case indicates that the device
is charging (Red & Blue LED will automatically power off once earbuds are fully charged to
100%)
NOTES:
-
If red LED on T328 earbuds or blue LED on T328 power case do not appear while charging in
charging slots, lightly push the earbuds down to align the charging receptors of earbuds (see
#11 on Product Map above) & power case in charging position
-
To indicate the T328 is low in battery, a red LED will flash quickly and/or earbuds & power
case will automatically power OFF
b) Charging Case:
1. Via wireless charging dock/pad (not included):
a) Center the T328 charging case (see #4 on Product Map above) on a certified wireless
charging source (such as a wireless charging dock
– not included)
b) Solid red LED indicates the T328 is charging (Red LED will automatically turn off
once the T328 is 100% fully charged)
c) To stop charging, remove the T328 charging case from wireless charging source (not
included)
2. Via micro-USB/USB charging cable:
a) Insert micro USB into the T328
& connect the USB output to a certified wall adapter
(not included)
b) Solid red LED indicates the T328 is charging (Red LED will automatically turn off
once the T328 is 100% fully charged)
c) To stop charging, remove the micro-USB/USB charging cable from the T328 charging
case
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,