T138 Product Map
To charge the T138
1. Insert the micro USB output of the charging cable into the
T138
& connect USB output
to a wall adapter (not included).
2. Grey LED light will light up & the digital battery display will indicate battery
percentage while device is being charged. (LED will turn off after 10 seconds)
3. LED screen will display IN (DC 5V/1A micro USB input is being used to charge the
T138)
4. Once fully charged, battery display will indicate 100%.
NOTE:
To activate flashlight, double press the power button (double press again to turn
flashlight OFF) at any time
To verify remaining battery power, press power button
To charge electronic devices using the T138
1. If your electronic device is compatible with a micro USB adapter, you may use the
cable included with the T138. If your electronic device requires a different adapter for
charging (such as iPhone 4/5/6), use the cable included with your device.
2. Connect selected adapter to your electronic device & USB output to the 1A or
2.1A port
