T256 Operation
a) T256 Speaker
1. On: press power button towards icon to turn the T256 speaker ON
2. Once T256 speaker has been turned ON, it is automatically in WIRELESS mode.
NOTE: previously paired devices will automatically connect to the T256 speaker
3. Off: press power button towards
icon to turn the T256 speaker OFF
b) T256 Wireless Charging Dock
1. On: insert micro USB into the T256
& connect the USB output to a certified wall adapter (not
included).
NOTE: Solid Red LED indicates that the T256 charging dock is ready to wirelessly charge
your electronic device with integrated wireless charging capability or equipped with wireless
charging adapter
2. Off: remove the micro-USB/USB cable from certified wall adapter (not included)
Wireless T256 Speaker Pairing
1. Once T256 speaker has been powered on, it is automatically in WIRELESS mode. Blue LED
(see #5 on Product Map above) will flash quickly to indicate it is ready for Wireless pairing
2. Enable Bluetooth function on your electronic device.
3. Search Bluetooth signal
Spector T256
& pair your device (a solid blue LED indicates the
T256 has been successfully paired)
Wireless Mode
1. Play, pause, volume control, previous/skip songs & incoming calls must be controlled directly
on your audio device (there are no built-in microphone in the T256 for answering incoming
calls)
To Charge the T256 speaker
a) Via T256 wireless charging dock (included)
1. Insert micro-USB into the T256 wireless charging dock & connect the USB output to a
certified wall adapter (not included).
2. Place T256 speaker on top of the wireless charging area of the T256 wireless charging dock (
see #2 in Product Map above).
3. A solid red LED on speaker (see #5 in Product Map above) & a solid blue LED on charging
dock (see #3 in Product Map above) indicates that the T256 charging dock is successfully
charging the speaker wirelessly
(NOTE: Red LED on speaker will automatically turn off once the T256 is 100% fully charged,
while blue LED on wireless charging dock will remain lit once the speaker is 100% fully
charged.)
4. To stop charging the T256 speaker: remove speaker from T256 wireless charging dock &
disconnect charging cable
b) Via charging cable (included)
1. Insert micro-USB into the T256
& connect the USB output to a certified wall adapter (not
included)
2. Solid red LED on speaker (see #5 on Product Map above) indicates that the T256 is charging
(Red LED on speaker will automatically turn off once the T256 is 100% fully charged)
3. To stop charging: remove T256 speaker from wireless charging dock & disconnect charging
cable
To wirelessly charge an electronic device using the T256 wireless charging dock
** Make sure your device has integrated wireless charging capability or is equipped with wireless
charging adapter
(NOTE: some electronic devices with integrated wireless capability may require users to manually
enable wireless charging in the settings of their electronic devices)
1. Insert micro USB into the T256 wireless charging dock
& connect the USB output to a
