T290 Operation
1. Pairing the T270 with your audio device
a.
Press & the power button to turn Speaker ON (Blue LED light will flash quickly to indicate speaker
is ready for pairing)
b.
Activate Bluetooth on your audio device
c.
Device name is Spector T290 (no paring password required)
d.
Once paired blue LED light will flash every 3 seconds
NOTE
If your Bluetooth enabled audio device has paired with the speaker successfully once before, the
two devices will re-connect automatically when they are turned on & within range.
To disconnect from Wireless mode, hold down the
button for 3 seconds
2. Operation in Wireless Mode
1)
Press & hold power button to power ON or OFF
2)
Press to play/pause in music mode
3)
Press quickly to skip to next song/ Press & hold to increase the volume
4)
Press quickly to skip to previous songs/ Press & hold to decrease the volume
5)
Press to answer/end incoming call/ Press & hold to re-dial last dialed call
Answer/End Call Button
LED Indicator
Play/Pause Button
Next Song/Volume Up
Button
Previous Song/Volume Down
Button
Charging Input
Microphone
Power Button
