T211 Product Map
To charge the T211
1.
Insert the micro USB tip of the charging cable into the T211 & connect USB output to a power source.
2.
Battery charge indicator
(white LED) will remain lit & will turn OFF once T211 is fully charged.
Operation
1. Wireless Mode
Pairing the T211 with your audio device
a. Turn the T211 power switch ON (white LED light (Bluetooth symbol) will flash quickly to indicate the speaker
is ready for pairing)
b. Turn on the Bluetooth on your audio device
c.
Device name is Spector T211 (no pairing password required)
d. White LED light will flash slowly once paired
NOTES:
If your Bluetooth device has paired with the unit successfully once, when the T211 is activated they will
connect automatically.
To disconnect from Wireless mode, hold down the T211 function button for 3 seconds
Operation in Wireless mode
a. Function button: Press once to Play/Pause when in music mode
b. Function button: Press once to Answer/End Calls
c. Function button: press & hold to REJECT incoming calls & double press when in music mode to redial last
call
d. Skip Songs & Volume Control
– must be controlled directly on your connected audio device
NOTE:
After a call is terminated, the T250 will resume to previous working status.
Power switch
Micro USB charge interface
3.5 Aux input interface
Indicator light & Function button
键键
Tablet or Smart Phone
Stand
Support
