O
O
I
I
N
N
T
T
0
0
3
3
D
D
O
O
w
w
n
n
e
e
r
r
’
’
s
s
M
M
a
a
n
n
u
u
a
a
l
l
Rev.1.2 (April, 2012)
49
indicates
‘MOTION DET’.
2) Set up the mode using the Function Setup switch.
- SENSITIVITY: You can select up to 8 MD areas. When SENSITIVITY number is high, motion
detection sensitivity is increased to recognize even small movement.
- AREA MODE: Determines whether to use the MD area selected in SENSITIVITY.
- SEL POS: Determines which of the 4 vertices of each MD area is to be used.
- XPOS: Determines the coordinate of the horizontal axis for SEL POS.
- YPOS: Determines the coordinate of the vertical axis for SEL POS.
- FILL
→
SET: Fills in a selected MD area. The color of the area can be selected from brown, orange,
blue, cyan, green, yellow, magenta and red.
- RETURN: Select this to save the MOTION DET menu settings and return to the SPECIAL menu.
◆
PRIVACY: Mask an area you want to hide on the screen.
1) When the SPECIAL menu screen is displayed, press the Function Setup switch so that the arrow
indicates 'PRIVACY'.
2) Set up the mode using the Function Setup switch.
- AREA: You can select up to 12 PRIVACY areas.
- MODE: Determines whether to use the area selected in the AREA.
- MASK COLOR: Determine area color. You can select Green, Red, Blue, Black, White, and Gray.
- MASK TONE: Adjust the brightness of MASK COLOR.
- TOP/BOTTOM/LEFT/RIGHT: Adjust the size and position of the selected area.
- RETURN: Select this to save the PRIVACY menu settings and return to the SPECIAL menu.