O
O
5
5
B
B
3
3
M
M
U
U
s
s
e
e
r
r
’
’
s
s
G
G
u
u
i
i
d
d
e
e
4.2. Quick Installation Guide
4.2.1. Connect PC and O5B3M to network.
1. Prepare a PC to run programs for the installation and video connection
(PC is needed to assign IP address to
2. In the case of using PoE, connect the PC and
your LAN Switch does not support standard PoE, connect
The DC power is applied through DC adapter.
Figure 4
4.2.2. Set IP parameters on O5B3M
Follow the sequence below for setting the IP parameter
i)
Run ONSIP installer
ii)
Click (1) in ONSIP installer window.> Double click on (2) > Fill in (4) > make a selection in (5) > Fill
the parameters in (6)
iii)
Click on (9) to apply the settings.
iv)
You can connect to admin page by clicking on (10).
to network.
Prepare a PC to run programs for the installation and video connection
(PC is needed to assign IP address to O5B3M)
In the case of using PoE, connect the PC and O5B3M to the network using one of the following ways. If
your LAN Switch does not support standard PoE, connect O5B3M as shown in dotted line in Figure
is applied through DC adapter.
Figure 4-1. Power and network connection
Follow the sequence below for setting the IP parameter
(1) in ONSIP installer window.> Double click on (2) > Fill in (4) > make a selection in (5) > Fill
(9) to apply the settings.
You can connect to admin page by clicking on (10).
LAN switch with
standard POE
(802.3af)
LAN switch
DC adaptor
to the network using one of the following ways. If
own in dotted line in Figure.
(1) in ONSIP installer window.> Double click on (2) > Fill in (4) > make a selection in (5) > Fill