Speco O2MB1, Руководство пользователя

Страница: 11 / 26

O O 2 2 M M B B 1 1 U U s s e e r r
’
’
s s G G u u i i d d e e
Rev.1.2 (Apr. 2014)
11
2.4. Functional Description

Power : Power input for supplying 12V DC, 0.5A power.
Caution : If O2MB1 is powered by PoE, do not plug in DC Jack with active DC power
into DC power connector.

Network (LAN)
100Mbps Ethernet connector (RJ-45) with PoE standard (802.3af). LED on the Ethernet connector shows
the status of O2MB1 as the followings:
- Link LED
It will be lit with orange color when network cabling is all right. Blinking orange color indicates that
normal data transmission is under way. Off state indicates that there is trouble in network connection.
- Status LED (It will be lit in green or red depending on the status)
①
Green : Green color indicates that the camera is in normal operation mode. Continuous green
indicates that data transmission is possible. Blinking green means that someone is connected to
O2MB1/O2MB1W.
②
Red : Continuous or blinking red indicates that hardware is in abnormal condition.

Micro SD Card slot
Please insert SD memory card when you want to use SD memory card. In case of pulling out SD memory
card, please push the SD card.

HDMI
Connect Camera Module.

MIC/Line Input
Connect external audio source or microphone.

Line Output
Connect speakers with built in amplifier. Audio from remote site is output through Line out in bi-directional
audio mode.
LED will be lit with red momentarily and it will be lit with green after a while when power is
applied into O2MB1/O2MB1W