111
APPENDIX: E-SATA CONNECTION
Please read the following instructions before using the E-SATA port.
Failure to do so may cause serious damage to the recorded video.
SPECO is not responsible for data loss caused by improper usage.
Use ONLY a new HDD or a HDD that is approved for the unit.
Turn off the NS before plugging the E-SATA HDD.
DO NOT disconnect the E-SATA port while the NS power is on.
The purpose of the E-SATA port is to extend recording capacity.
Once connected, DO NOT removes or disconnects the E-SATA port from the NS.
The E-SATA port is does not support the hot swappable function.
- End -
