USER GUIDE
Compatibility
Speck Presidio POWER battery case is compatible with iPhone® 7. Do not attempt to use with
other devices.
In The Box
• Presidio POWER battery case
• Micro-USB to USB 2.0 charging cable
Product Specifications
• Battery: 2500mAh Lithium Polymer
• Input: Micro-USB: SVDC, 1.0A
• Output: Apple Lightning™ .5V, 1.0A
Checking Battery Charge
To check how much battery power is available, press the power button on the front of the case. Lights will
illuminate accordingly to show battery percentage.
**** 76-100%
*** 51-75%
** 26-50%
*
≤25%
Installation
Bend back the top of Presidio POWER battery case.
Slide in your iPhone 7, ensuring the Lightning
connector is securely connected to the phone.
Fold the top of the case over iPhone and press phone
into the case.
How To Use
•
To activate the battery:
Hold the power button until LED lights turn on (about 2 seconds).
•
To turn off the battery:
Hold the power button until LED lights turn off (about 2 seconds).
•
To check battery status:
Press power button to check current battery charge.
•
To recharge the battery:
Connect case to a computer with included charging cable. Phone and battery
may also be charged with charging cable and USB wall adapter (not included).
•
To listen to audio with this case:
Please use Bluetooth headphones.
Questions or comments?
Contact Speck
Customer Service 1-888-872-4445
Monday-Friday 8:00am - 4:00pm (PST)
WARNING
Read all instructions and warnings prior to using this Presidio POWER battery case. Improper or unintended
use may result in injury to yourself or damage to your Presidio POWER battery case and/or your iPhone.
Speck is not liable for any injury or damage caused by improper or unintended use of this product.
Store Presidio POWER battery case in a cool, dry place when not in use. Avoid exposing the case to
moisture, high temperatures, intense direct sunlight, open flames, or corrosive materials at all times. Do not
submerge Presidio POWER in any liquid.
Do not disassemble this device or attempt to modify, open, short circuit, repair, or replace any part of the
Presidio POWER battery case. Doing so may result in injury to yourself or damage to your Presidio POWER
battery case.
Any changes or modification of this device could void the warranty.
Inspect the case carefully before each use, especially after any drop or bump, to check for signs of damage.
If the Presidio POWER case becomes damaged from dents, battery punctures, or tears, begins swelling,
overheating or leaking, or functions abnormally, immediately discontinue use and contact Speck. Avoid all
contact with leaking battery contents.
Presidio POWER is designed to be charged and used many times. Use the included micro-USB cable to
recharge the case. Never use a modified or damaged charging cable. The battery may be warm while
charging. Do not attempt to charge this device using any method, apparatus, or connection other than the
device’s micro-USB cable.
Do not attempt to replace any part of this device.
Recycle or dispose of the Presidio POWER battery case in accordance with applicable federal, state, and
local laws and regulations. Never dispose of batteries in trash or fire.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced technician for help.
CAUTION:
To comply with the limits of the Class B digital device, pursuant to Part 15 of the FCC Rules, this
device must be used with certified peripherals and shielded cables. All peripherals must be shielded and
grounded. Operation with non-certified peripherals or non-shielded cables may result in interference to
radio or reception.
If this device is intended by Purchaser to be used by a minor, purchasing adult agrees to provide detailed
instructions and warnings to any minor prior to use. Failure to do so is the sole responsibility of Purchaser,
who agrees to indemnify Manufacturer for any unintended use/misuse by a minor.
Presidio POWER is backed by Speck’s Limited One-Year Warranty.
Exclusions & Limitations
Except for the limited warranty expressly set forth at speckproducts.com/warranty or to the extent
restricted or prohibited by applicable law, Speck expressly disclaims any and all other warranties expressed
or implied, including any warranty of quality, merchantability, or fitness for a particular purpose, and you
specifically agree that Speck shall not be liable for any special, incidental, indirect, punitive, or consequential
damages for breach of any warranty of any type on any Speck product. In addition to and without limiting
the generality of the foregoing disclaimers, the limited warranty does not, under any circumstances, cover
the replacement or cost of any electronic device or personal property inside or outside of the Speck product.
For full terms and conditions, please visit: speckproducts.com/warranty
Speck Products. Designed in California. Made in China. iPhone and Lightning are registered trademarks
of Apple Inc.
LED
lights
/
speaker
port
power
button
speaker
port
pass-through
charge
/
sync