Speck Fader 1, Справочное руководство, Страница: 5 / 28

Introduction
Chapter 1 Introduction Section 1 1 1
Thank you for purchasing our One Fader Desktop Analog Slide Fader. The
One Fader
has operational
features that are easy to understand and you should be up and running in no time. If you are unfamiliar
with audio equipment or audio signal flow, it is recommended that you read this manual. If you have any
questions regarding this or any Speck product, do not hesitate to contact Speck Electronics.
Speck Electronics
341 E. Alvarado Street
Fallbrook, CA 92028
Phone: +760-723-4281
Email: techsupport@speck.com
www.speck.com
General Description
The
One Fader
is a series of three desktop analog slide faders: The
Fader 1
- mono slide fader, the
Fader 2
- stereo slide fader, and the
Fader 3
- stereo slide fader with a monitor section.
The One Fader has a transparent neutral signal path and high headroom that will handle balanced signals
up to +28dBu. No VCA’s, no CMOS switching, and no A/D - D/A converters... just 100% analog signal
path. All audio inputs and outputs are fully balanced and available on XLR and TRS connectors so you
can connect the One Fader to virtually any line level device. For product compatibility, all models have
accessible jumpers that can provide an extra 6dB or 10dB of gain.
Each fader channel has the necessary input and output electronics to allow the One Fader to interface to
any balanced, unbalanced, transformer, or transformer-less line level signal. Most importantly, no
additional mixer or audio interface is required. With its clean, uncluttered layout, the One Fader can be
placed in a convenient desktop location.
Model Fader 1
Mono Fader
Model Fader 2
Stereo Fader
Model Fader 3
Stereo Fader + Monitor
Section